SPARE WHEEL COVER - PLAIN BLACK X11031 | Vinyl spare wheel cover to suit up to 31 inch wheel. Plain black. | |
SPARE WHEEL COVER WITH SLOT FOR NP BRACKET - BLACK X11026 | Vinyl spare wheel cover to suit up to 31 inch wheel. Has slot for numberplate bracket to fit through. Plain black. NOTE: Bracket not included. | |
CENTER PULL RECOVERY HITCH K6205 | Kaymar has designed and manufactured a centre pull recovery hitch for those sticky moments when traveling off road. Please note it is not recommended for towing, you replace the recovery hitch with the tow hitch when you need to tow a vehicle any distance. The recovery hitch is to assist you out of the situation only. Being removable also provides you with greater clearance on some vehicles. | |
PIVOT COVERS K6144 | Poly pivot covers to protect pivot threads and shaft | |
SNATCH BLOCK K6095 | Kaymar's snatch block is designed specifically as an aid for winch recovery. The sides of the Snatch Block pivot apart to allow the winch cable to be fittedinto the specifically designed sheave. When in use the block is anchored through the large eyelet and provides you withdouble the pulling power, at half the load on the Tirfor or winch. Kaymar's 150mm Snatch Block can be used in conjunction with a power or hand winch, and is most likely the strongest snatch block available. | |
TOW HITCH PIN & CLIP K6015 | Tow hitch - pin & clip | |
TOW HITCH SUIT 76 WAGON GXL, LONG DROP K6013 | To suit Bar Part No. K1235, K3800 | |
TOW HITCH SUIT 80U (Upgrade bar), 100 K6006 | To suit Bar Part No. K1030U, K3320, K3415U, K3435U | |
TOW HITCH - 80 (Orig bar), 62, 40, F250, PathFinder K6005 | To suit Bar Part No, K2205, K1340, K2955, K3605, K3660-S, K3705, K3720, K3720U, K3720U-S | |
FACTORY REFLECTOR RE-MOUNT FOR FACELIFT LC200 K20009R/K20009L | Bracket with reflector to mount into reflector insert if Kaymar carrier/jc holder has been removed. Suits 200 Series facelift models excluding GX models. | |
FACTORY REFLECTOR RE-MOUNT FOR LC200 K20008R/K20008L | Enables the original factory reflectors to be mounted if Kaymar carrier/jc holder has been removed. Suits 200 Series pre-facelift models and all GX models. | |